Chimney Clean Melbourne

SERVICES

Chimney Cleaning and Inspection

To remove the need to access the chimney from your roof, our equipment is established within your house. Using a rotary chimney cleaner, the chimney column is brushed at around 3000 rpm to remove built up residue and creosote. All dislodged material and dust are contained by a high-powered vacuum cleaner at the base of the chimney, ensuring no impact on your internal rooms.

Once we finish our fireplace cleaning, we can also look into the chimney from the base and ensure there is no cracking immediately above the fireplace. Where the chimney reduces in size from the fireplace width to the chimney width, there are sometimes minor cracks that occur due to slight flexing. In some cases, mortar sealing these connections is up to 100 years old, and is expected to decay and break out. Again, this will be obvious to us and our inspection from the base should be able to identify these issues. From there, we can break out degraded material and replace it with new mortar to ensure a complete seal.​

Chimney repaint in Melbourne VIC 1

Chimney Repair

Once moisture finds its way into the areas between bricks, it causes degradation of the mortar. Once mortar begins to break up / break out, it causses voids for more moisture to infiltrate, and accelerates the issues. In the worst of case, this spalling of the original mortar an lead to structural compromises of the chimney column itself. Nobody wants to have to worry about their chimney coming down in a string wind!
When we undertake a chimney repair, we ensure we break out all degraded mortar and replace with a fresh amount. This is called ‘tuck-pointing’, and is just like you’d expect – squeezing a toothpaste-like mortar in-between the bricks to seal it right back up . This will increase the life of the original masonry, increase the efficiency of the fireplace itself and reduce the likelihood of future major repairs.
Chimney sweep in Melbourne

LOCATION & HOURS

We’ll come to you, so let us know when you aren’t planning to light up the fire and we’ll be in and out before you know it. Cleaning can take between 1.5 to 3 hours, so please consider this when booking.

Address

CHIMNEY CLEAN MELBOURNE
Unit 5
​192 Argyle St
Fitzroy VIC 3065

}

Hours

SUNDAY
Closed

Get in touch

A BIT OF KNOW-HOW

Once your chimney and fireplace are cleaned thoroughly, and all of the seals are working as they should, your fireplace will work much more efficiently – as it was originally designed. Couple that with good quality, dry wood, and you’ll be able to leave your fire on a low setting to burn throughout the night. It is good to give your fireplace a good rip roaring go everynow and then to ensure creosote doesn’t have the opportunity to build up. As soon as you notice decreased performance in your fireplace again, Chimney Clean Melbourne can shoot back and give the flue a quick clean.Buy good quality wood! It makes a huge difference!

As with anything, good quality products lead to good quality results, and the same certainly goes for wood. Dry, dense wood will burn hotter and longer than lightweight pine that is reasonably young. There is a lot of advice on which wood is ideal to burn, and we suggest doing your own research localised to your area – as there will be wood sourced locally that is perfect for you. Of course, this will mean that the wood costs a bit more outright.On average, and Australia house burns about 3 tonnes of wood per winter, which equates to about 2 and a half ‘cords’ (the measure of firewood). This is about 600 pieces of firewood per winter. A ute can fit approximately 80 pieces of firewood in the back, to give you an idea of the volume of this wood.

Find us here

​Google